HBL26CM11V
 |
Corrosion resistant, yellow nylon. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Device Type | Plug |
| Device Style | Twist-Lock |
| Amperage | 30A |
| Volts | 125V |
| Poles and Wires | 2 Pole, 3 Wire Grounding |
| Design Type for Plugs and Connectors | Valise |
| Body Style | Straight |
| Configuration Type | L5-30P |
| Enhancement | Corrosion Resistance |
| Color |  |
| Horsepower | 2 |
| Cord Dia. | .590"-.930" (15.0-23.6) |
| Blade Holder Material | yellow nylon |
| Housing Material | Yellow nylon |
| Cord Clamp Material | Nylon |
| Blade Material | Brass |
| Terminal Clamp Material | Cold rolled steel-nickel-plated |
| Terminal Screw Material | #8-32 Brass (white finish on neutral screw when used) |
| Ground Screw Material | #8-32 Steel (green finish) |
| Cord Clamp Screw Material | 302/304 Stainless Steel |
| Body Holding Screw Material | Steel -zinc-plated |
| Ratings | Molded into face |
| Dielectric Voltage Withstand | 2,000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Temperature Rise | Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49. |
| Terminal Accommodation | 30A #10 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No. 0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | UL/CSA |
 |
